oticon Alta2 Pro Instructions For Use Manual page 18

Warnings
If you have an active brain implant,
please contact the manufacturer of
your implantable device for information
about the risk of disturbance.
X-ray/CT/MR/PET scanning and
electrotherapy
Remove your hearing aid before X-ray/
CT/MR/PET scanning, electrotherapy,
surgery etc. as your hearing aid may
be damaged when exposed to strong
fields.
Heat and chemicals
The hearing aid must never be exposed
to extreme heat e.g. left inside a parked
car in the sun.
The hearing aid must not be dried in
microwave ovens or other ovens.
34 About Start up Handling Options
The chemicals in cosmetics, hairspray,
perfume, aftershave lotion, suntan
lotion and insect repellent can damage
the hearing aid. Always remove your
hearing aid before applying such prod-
ucts and allow time to dry before use.
Possible side effects
Hearing aids, moulds or domes may
cause an accelerated accumulation of
ear wax.
The otherwise non-allergenic materials
used in hearing aids may in rare cases
cause a skin irritation or other side
effects.
Please seek consultation with a
physician if these conditions occur.
Warnings More info
Interference
The hearing aid has been thoroughly
tested for interference, according to the
most stringent international stand-
ards. However, interference between
the hearing aid and other devices (e.g.
some mobile telephones, citizens band
systems and shop alarm systems and
other devices) may occur. If this occurs,
increase the distance between the
hearing aid and the interfering device.
Connection to external equipment
The safety of the hearing aid when
connected to external equipment (via
auxiliary input cable, via USB cable, or
directly), is determined by the external
equipment. When connected to external
equipment plugged into a wall outlet,
this equipment must comply with
IEC-60065, IEC-60950 or equivalent
safety standards.
35