Wall Mount Using Din Rail Brackets - Cisco 1100-8P Hardware Installation Manual

Install and Connect the Router

Wall Mount using DIN Rail Brackets

The router is shipped with DIN Rail brackets that are to be secured on the bottom side of the chassis. Your
chassis installation must allow unrestricted airflow for chassis cooling.
Note
Wall mount using DIN Rail brackets is applicable only for C111x.
To attach the DIN Rail brackets to the router chassis, use the PHMS screws and the plastic spacers provided for each
bracket.
Figure 19: DIN Rail Bracket Installation-C111x
1
2
Figure 20: Orientation of DIN Rail Brackets
Screws
DIN Rail Brackets
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
Wall Mount using DIN Rail Brackets
31