Auxiliary Power; Reset; Aos 5.03_Ca17 Or Later - Neptune Systems APEXEL User Manual

Auxiliary Power

To power up the Apex without the use of the EB832

2.1mm tip, 12V input ,0.7A DC output with a center positive electrode

(Use Neptune P/N PS12)

Reset

AOS 5.03_CA17 or later:

To reboot the Apex controller press the button quickly. The Apex

status light will go fromOrange> Green> Purple> Green> Orange
To put the Apex into WiFi access mode press and hold the reset button

until the status LED changes to
the reset button.
To initialize the Apex to factory settings press and hold the button until

the status LED turns
button.
BLUE
RED (about 30 seconds), then release the reset
(about 6 seconds), then release