Operation On Gdc Server - GDC CLA-2000 User Manual

3. OPERATION OF CLA-2000
Step 5: Click

3.3.3.2 Operation on GDC Server

Step 1: Connect the CLA-2000 to a network switcher with an Ethernet cable (Please refer
to P.10 Session 2.5.1)
Step 2: Connect the CRU and storage device to the CLA-2000 using eSATA cables
(Please refer to P. 13 Session 2.5.3.2). Make the connected drive (CRU or storage
device) to be a shared drive.
Step 3: Go to Content Manager on Control Panel, create a new content source, fill in
CLA-2000 IP, and select source CIFS (path:/share, username: guest, password: leave it
blank), and then you can ingest content from CLA-2000.
CLA-2000 User Manual
Asset Manager in the Server
26
tab to check transfer progress.
3 May 2016