TP-Link Archer AX6000 User Manual page 79

Chapter 12
The smart connect function lets you to enjoy a more high-speed network by assigning
your devices to best wireless bands based on actual conditions to balance network
demands.
1. Go to Advanced >
2. Enable Smart Connect.
3. Keep the default or set a new SSID and password, and click Save. This SSID and
password will be applied both for 2.4GHz and 5GHz wireless networks.
¾ To change the security option:
1. Go to Advanced >
2. Select the wireless network
3. Select an option from the
the default settings unless necessary. If you select other options, configure the
related parameters according to the help page.
In addition
• Mode - Select a transmission mode according to your wireless client devices. It is
recommended to just leave it as default.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.
Wireless > Wireless Settings.
Wireless > Wireless Settings.
2.4GHz or 5GHz.
Security drop-down list. We recommend you don't change
Customize Your Network Settings
75