TP-Link Archer AX6000 User Manual page 100

Chapter 13
• Bacon Interval
between beacon packets that are broadcasted by the router to synchronize the
wireless network. The default is 100 milliseconds.
• RTS Threshold
size of data transmission through the router. The default size is 2346. If the
packet size is greater than the preset threshold, the router sends Request of
Send frames to a particular receiving station and negotiates the sending of a
data frame, or else the packet will be sent immediately.
• DTIM Interval
DTIM (Delivery Traffic Indication Message). The default interval is 1, indicating
the DTIM interval is the same as Beacon Interval.
• Group Key Update Period
86400, or use the default value 0 that indicates no key interval to control the
time interval for the encryption key automatic renewal.
• WMM Feature
function guarantees the packets with high-priority messages being transmitted
preferentially.
• Short GI Feature
increase the packet capacity by reducing the GI (Guard Interval) time.
• AP Isolation Feature
connected to the network from interacting with each other, but still able to
access the internet, enable AP Isolation feature.
• Zero-Wait DFS
router to immediately reselect a new channel once radar signal is detected on
a channel allocated to radar devices to ensure lag-free network experience. It
is for 5GHz and enabled by default .
- Enter a value between 40 and 1000 to determine the duration
– Enter a value between 1 and 2346 to determine the packet
- Enter a value between 1 and 15 to determine the interval of
- Enter the number of seconds between 30 and
- It is enabled by default and highly recommended, for the WMM
- It is enabled by default and highly recommended, for it will
- If you want to confine and restrict all wireless devices
- Zero-Wait DFS (Dynamic Frequency Selection) allows the
Manage the Router
96