Operation - Harbor Freight Tools 90285 Assembly And Operating Instructions Manual

1. Turn the car over and open the Battery Pack Lock lever to open.
2. Insert the Battery Pack and Lock the Battery Pack lever to close.
Optionally, if the Battery Pack is not used, place five "AA" Ni Cad batteries in the
Battery Holder and insert it where the Battery Pack would go.
3. Turn the Radio Control Unit over and slide the battery cover off. Insert a square, 9 volt
battery (not included). Replace the cover.
4. Flip the On/Off switch under the car to the On position.
5. Screw the antenna into the top of the Radio Control Unit, then fully extend it.
Drive Joystick
FORWARD
REVERSE
6. Push the Drive Joystick up to move the car forward, pull it down to move in reverse.
7. Push the Steering Joystick right to turn right; push left to turn left.
Both Joysticks can be operated at the same time. Operate in an open area away from
spectators.
SKU 90285

Operation

Battery Pack
Battery Pack Lock
Radio Control Unit
Steering Joystick
LEFT
Page 5
Antenna
9 Volt Battery
Compartment
Radio Control Unit
Battery Cover
RIGHT