Mooer Micro Series Owner's Manual

Distortion Pedal
Main Features
Ÿ All-sided high-gain distortion with excellent dynamic response and
definition, especially suit for solo playing
Ÿ 3 Working Modes: Natural/Tight/Classic
Ÿ Full metal shell
Ÿ Very small and exquisite
Ÿ True bypass DC 9V Adapter power supply
Natural: Natural, organic distortion sound with nice dynamic
response.
Tight: High gain distortion sound with powerful midrange and tight
bottom end.
Classic: Vintage high gain distortion with plenty of sound details.
3
6
7 8
9
4
5
6. Mode Switch: Switch between Natural mode, Tight mode and
Classic mode.
7. LEVEL Knob: Adjust the output volume.
8. TONE Knob: Adjust the brightness of tone.
9. GAIN Knob: Adjust the gain.
Working Mode: 3 (Natural/Tight/Classic)
Input: 1/4" monaural jack (impedance: 470k
Output: 1/4" monaural jack (impedance: 100 Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 11 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight:160g
Accessories: Owner's Manual
* Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of Solo, when the LED
is lit up, the effects is on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
Ohms )