Table of Contents
Advertisement
Double or triple seal quickly and easily - Seal the bag a second time or third time by pulling
down and sealing for consistent placement of seals.
Patented Anti-Jam Device - During the loading and sealing operation, this device detects
obstructions and automatically reverses the pressure bar, discontinuing the cycle operation.
1.5 Available Options
Spare Parts Kit: Additional PTFE Anti-Stick material, heater wire, valve and other components
make this kit a must.
See Chapter 4, Section 4.l for recommended Spare Parts Kit.
Special funnels: Send us your product and we will evaluate the loading to determine the best
funnel design.
Bag deflator: Quickly mounts to the sealer bar squeezing the air from the bag while sealing.
1.6 Special Note on Safety
Although many safety features have been included in the mechanical, electronic, and pneumatic
systems, improper use, improper adjustments, or neglect of preventative maintenance may result
in serious personal injury.
1.7 Specifications
Dimensions: 19.25" wide x 14.675" deep x 21" tall (See Figure 1-1)
Weight: 65 lbs.
Air: 50 psi
Electric: 117V/60Hz or 220V/50Hz
Bag sizes: 2 x 2 up to 11 x 16
Product pass through area: approx. 2.75"
1.8 Unpacking & Setup
The T-200 is shipped completely assembled and in a carton. Remove all tape, banding or packing
materials that secure the machine. To ensure the highest production possible, consider product flow to the
bagger and packaged product flow away from the bagger when positioning the bagger into your
packaging areas.
1.9 Operating Environment
When you choose a location for installation, make sure the area is free of excess dust, dirt, and moisture.
Advertisement
Table of Contents
Need help?
Do you have a question about the T-200 and is the answer not in the manual?
Questions and answers