Hookup Diagrams - Mackie DRM18S Owner's Manual

Hookup Diagrams

SPM400 Pole Mount
A DRM18S subwoofer and DRM loudspeaker is the perfect tool for a standard PA setup, whether installed in a club,
gymnasium, house of worship and more.
Here you will want to connect a cable from the mixer's left main output jack to the ch. 1 input jack of the DRM18S.
The ch. 1 high-pass output of the DRM18S subwoofer is then connected to the ch. 1 input of the DRM loudspeaker
[DRM212 in this example].
It is possible to reproduce this exact same hookup in stereo. Simply utilize the left and right main outputs from the mixer
to feed the ch. 1 input of each DRM18S and mirror the rest of the system as described above.
You will want to set the crossover to DRM Top as described in detail on page 13. Or set it to Var if using a non-DRM
loudspeaker.
Simple PA Setup
5
Owner's Manual