Mackie DRM18S Owner's Manual page 8

Hookup Diagrams continued...
FB 00 Flybar
FKDRM 8S Flyware Kit
This setup is perfect for installs, touring systems, festivals and/or small stages...any venue requiring a 75–100 foot throw.
Two subwoofers are introduced to this setup, providing even low frequency coverage for the flown subs.
It is possible to reproduce this exact same hookup in stereo. Simply utilize the left and right main outputs from the mixer
to feed the main inputs of the top subwoofers to mirror the rest of the system as identified here.
Another important aspect to keep in mind is the rigging setup of loudspeakers. In this diagram, the DRM18S subwoofers
and DRM12A powered arrayable loudspeakers are flown utilizing an FB100 Flybar. Note that each subwoofer requires
its own FKDRM18S Flyware Kit, as well. Refer to pages 18 and 19 for more information about rigging (and eyebolts).
You will want to set the crossover on both subwoofers to DRM Top as described in detail on page 13.
Two flown DRM18S subwoofers with four DRM12A arrayable loudspeakers
8
DRM18S 2000W 18" Professional Powered Subwoofer