Consumer Information On Sar (Specific Absorption Rate) - LG X power 2 -M320G Quick Start Manual

9. Use your wireless phone to help others in emergencies. Your wireless
phone provides you a perfect opportunity to be a "Good Samaritan" in your
community. If you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 911 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special wireless nonemergency assistance
number when necessary. Certain situations you encounter while driving
may require attention, but are not urgent enough to merit a call for
emergency services. But you can still use your wireless phone to lend a
hand. If you see a broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside assistance or other special
non-emergency wireless number.
For more information, please call to 888- 901-SAFE.
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the Government's Requirements for Exposure
to Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to
radiofrequency (RF) energy set by the Federal Communications Commission
(FCC) of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed
by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and
health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is
1.6 W/kg. * Tests for SAR are conducted using standard operating positions
specified by the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands.
Although SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the maximum value.
Because the phone is designed to operate at multiple power levels to use
only the power required to reach the network, in general, the closer you are
to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by the
government adopted requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on the body) as required
by the FCC for each model.
The highest SAR values for Canada are:
* Head: 1.15 W/kg
* B ody (Body-worn/Hotspot): 0.58 W/kg
(Body measurements differ among phone models, depending upon available
accessories and FCC/ISEDC requirements).
While there may be differences between SAR levels of various phones and
19