Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Russell Hobbs 4101-10
Summary of Contents for Russell Hobbs 4101-10
- Page 1 instructions...
-
Page 3: Important Safeguards
Read the instructions and keep them safe. If you pass the kettle on, pass on the instructions too. Remove all packaging, but keep it till you know the kettle works. important safeguards Follow basic safety precautions, including: 1 This kettle must only be used by or under the supervision of a responsible adult. Use and store the kettle out of reach of children. - Page 4 7 Fill the kettle via the lid aperture. 8 Fill with at least enough water to cover the element, but don’t fill above MAX, or it may spit boiling water. fitting the lid 9 Check the lid is fully closed before switching the kettle on, or it may not switch off when it boils: a) there are four latches round the lid b) tilt it slightly, with the steam vent down...
-
Page 5: Water Filter
care and maintenance 1 Check the kettle is switched off – press the bottom of the switch (0). 2 Unplug the cable from the wall socket, then remove the connector from the kettle. 3 Leave the kettle to cool down fully. 4 Wipe the kettle, inside and out, with a damp cloth. - Page 8 connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.
Need help?
Do you have a question about the 4101-10 and is the answer not in the manual?
Questions and answers