Warning Indicators - Optoma ZH506T User Manual

ADDITIONAL INFORMATION

Warning indicators

When the warning indicators (see below) light up or flash, the projector will automatically shutdown:
‡ "Lamp" LED indicator is lit red and if "Power" indicator flashes red.
‡ "Temp" LED indicator is lit red and if "Power" indicator flashes red. This indicates the projector has
overheated. Under normal conditions, the project can be switched back on.
‡ "Temp" LED indicator flashes red and if "Power" indicator flashes red.
Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or
flash, please contact your nearest service center for assistance.
LED lightning messages
Message
Standby state
(Input power cord)
Power on (Warming)
Power on and Lamp lighting
Power off (Cooling)
Quick Resume(100 secs)
Error (Lamp failure)
Error (Fan failure)
Error (Over temp.)
‡ Power off:
‡ Temperature warning:
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 45 degree C.
If the problem persists in spite of the above.
Please contact a service center for repair.
66 English
Power LED
(Red)
Steady light
(0.5 sec off / 0.5 sec
sec on). Back to red
cooling fan turns off.
(0.25 sec off / 0.25
Flashing
Flashing
Flashing
Power Off
Press power key again.
Warning
TEMPERATURE TOO HIGH
(Blue)
Flashing
on)
Steady light
Flashing
(0.5 sec off / 0.5
steady light when
Flashing
sec on)
Steady light
Temp LED Lamp LED
(Red) (Red)
Steady light
Flashing