Setup Reset Osd Menu - Optoma ZH506T User Manual

USING THE PROJECTOR
Input Source
Select the input source between HDMI1/MHL, HDMI2, VGA, Component, and
Input Name
Use to rename the input function for easier identification. The available options include HDMI1/MHL, HDMI2, VGA,
Component, and Video.
VGA Out
Specify which the VGA Out connector to be used to connect the projector with the external display device.
High Altitude
When "On" is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin.
Display Mode Lock
Choose "On" or "Off" to lock or unlock adjusting display mode settings.
Keypad Lock
When the keypad lock function is "On", the Keypad will be locked. However, the projector can be operated by the
remote control. By selecting "Off", you will be able to reuse the Keypad.
Information Hide
Enable this function to hide the information message.
‡ Off: Choose "Off" to show the "searching" message.
‡ On: Choose "On" to hide the info message.
Logo
Use this function to set the desired startup screen. If changes are made, they will take effect the next time the
projector is powered on.
‡ Default: The default startup screen.
Neutral: Logo is not displayed on startup screen.
‡
‡ User: Use the stored picture as the startup screen.
Background Color
Use this function to display a blue, red, green, gray color, none, or logo screen when no signal is available.
Note: If the background color is set to "None", then the background color is black.

Setup reset OSD menu

Reset OSD
Return the factory default settings for OSD menu settings.
Reset to Default
Return the factory default settings for all settings.
Video.
45
English