Table of Contents
Advertisement
Step 3: Finishing the Installation
1. After you have installed your Card and replaced the cover on your computer,
turn your computer back on and let it boot up.
2. Windows will detect that new hardware has been installed. Depending on
which version of Windows you are using, a window similar to the one
pictured below will appear. Select the option that will automatically install
the software.
3. If you are using Windows 2000 or Windows XP, you may see a screen similar
to the one below. This does not mean there is a problem. Select
"Continue Anyway".
INSTALLING THE CARD
8
Advertisement
Table of Contents
