Zoetis AlphaTRAK 2 Manual page 3

T H E M E T E R
Turning Meter On and Off and
Checking Codes.
BEFORE TURNING METER ON: Check the expiration code on the test strip vial.
DO NOT USE EXPIRED STRIPS.
A. Turn meter on by inserting test strip with butterfly facing up and flying into the meter.
B. WATCH METER SCREEN CLOSELY
C. The CODE screen will appear automatically.
The code on the meter should match the code
on the vial for the species (dog or cat) you
are testing.
D. If the species codes DO NOT MATCH, see next section.
E. REMOVE test strip to turn off meter.
Setting Codes for Dog or Cat
A. After inserting a test strip to turn the meter on,
wait for the CODE screen to appear.
B. Press as soon as you see the CODE screen appear to cycle through code
numbers (01 – 99) until you find the code that matches the code on the test strip vial.
NOTE: Pressing will allow you to cycle backward through code numbers.
C. To save setting, wait until the CODE screen disappears. Settings are saved
automatically. Do not press
D. If you miss the CODE screen, simply REMOVE the test strip to turn off meter,
then reinsert to start over.
to save, as this will change the code.
The Lancing Device Getting A Blood Sample
For more detailed instructions
and troubleshooting, please see
the Complete User Manual.
NEED ADDITIONAL HELP?
CALL CUSTOMER CARE at
Understanding Results
1-888-ZOETIS1.