Nfc - Huawei P smart User Manual

PAN
BLE
Enable or disable Bluetooth: From the home screen, swipe down from the status bar, open the
shortcuts panel, and then touch
Bluetooth settings screen.
Pair a Bluetooth device: Enable Bluetooth from the Bluetooth device's settings screen. Check that
the Bluetooth device is set to visible. From Available devices, touch the device you want to pair and
then follow the onscreen instructions to complete pairing.
Unpair a Bluetooth device: Enable Bluetooth from the Bluetooth device's settings screen. Touch
next to the name of the paired device and then touch Unpair.
Change Bluetooth device name: From the Bluetooth settings screen, enable Bluetooth. Touch
Device name, enter a new name for the device, and then touch Save.
View Bluetooth help: From the Bluetooth settings screen, touch
establish Bluetooth connections with in-car systems, headsets, speakers, wearables, Phone, tablets,
and computers.

NFC

Introduction to NFC
NFC (Near Field Communication) is a technology that enables short-distance wireless communication.
Through NFC's point-to-point mode, two devices can transfer data in real time when they are within
10 cm (4 inches) of each other. Photos, networks, and apps can all be quickly shared using this
method. NFC read/write mode lets you check product information contained in NFC tags. NFC card
emulation mode allows your device to act as a bank card for quick and easy payments.
Only POT-LX1 supports NFC. Please keep the NFC area close to other devices or objects while
using the NFC function.
Tethering
Connect to Bluetooth Low Energy (BLE) devices
to enable or disable Bluetooth. Touch and hold
Device Connection
to open the
to view information on how to
52