Listening To Fm Radio; Selecting A Station; Changing The Information Displayed; Storing And Recalling Presets - PURE DTM-300 Owner's Manual

8

Listening to FM radio

To listen to FM radio push the DAB/FM button until you see FM on the left of the
screen and the frequency display.

Selecting a station

To select a station either:
•
press the SCAN buttons to step up/down the frequency range in steps
of 0.05 MHz or hold down for a second to seek to the next station with a
strong signal.
•
press the +/- buttons to skip to the next/previous FM preset
•
press a numbered button on the remote to select an FM preset directly
If you are listening to an RDS station you see the RDS icon on screen and
extra RDS information may be available as described below.
If you are listening to a stereo station you see the Stereo icon (
screen.

Changing the information displayed

To change what you see on screen while you listen to FM radio push the
Display button. Choose between the following options:
RadioText
Broadcast info Description of the content broadcast by the station and its
Date and time

Storing and recalling presets

You can store up to 9 of your favourite stations as presets which you can then
access quickly using the numbered buttons on the remote control.
To store a preset - Hold down the numbered button you want to store the
current station under. The preset is stored, overwriting any previous one.
To recall a preset - Press the numbered button for the preset you want to
listen to.

Changing FM stereo mode

To change between Stereo and Mono press the Menu button, select FM mode
and choose between Stereo or Mono. Mono may be clearer for stations with
weak signals. The current mode is shown on the top line of the display.
Dynamic text broadcast by some RDS stations.
frequency. RDS stations only.
Date and time obtained from the FM signal. RDS stations
only.
)on