Verifying the Interface QoS Configuration
Command
show interface [interface slot/port]
priority-flow-control [module number]
show interface untagged-cos [module number]
running-config ipqos
startup-config ipqos
Cisco Nexus 5000 NX-OS Quality of Service Configuration Guide, Release 5.1(3)N2(1)
48
Configuring QoS on Interfaces
Purpose
Displays the priority flow control details for a
specified interface.
Displays the untagged CoS values for all interfaces.
Displays information about the running configuration
for QoS.
Displays information about the startup configuration
for QoS.
OL-26657-01