Back View - Agilent Technologies U1115A Operating Instructions Manual

Back View

Slide power switch
Figure 4 Back view of the U1115A Wireless Logging Display
Turning On the U1115A
To turn on the U1115A , set the slide power switch to On. (figure 4)
Supplying External Power to the U1115A
1 Plug the micro USB head to the micro USB port on the side of the U1115A.
(figure 3)
2 Plug the USB connector to a USB power source to supply an external power to the
U1115A.
• Once a connected IR-to-Bluetooth Adapter is turned off, below
scenarios will occur :
1 The Not Connected annunciator will appear on the display.
2 Subsequently, the
• The micro USB port on the U1115A serves as an external power port
and not for data transfer or battery charger.
• The batteries are safe to remain inside the U1115A while it is being
powered up by an external power.
5
annunciator will only appear after 15s-20s.
Stand
Battery cover
with attached
magnet