Note Repeat - PRESONUS ATOM Owner's Manual

2 Controls
2.1

Note Repeat

Note Repeat
2.1
As previously mentioned, Note Repeat allows you to repeatedly trigger a sound
at a specified rate for as long as you hold down the assigned pad. In this way, you
can, for example, trigger a series of ¼ notes simply by pressing and holding a pad.
The MIDI clock determines the tempo at which Note Repeat triggers a sound.
While on Internal Clock, this is set from the Quick Setup Mode. See Section
2.2.5 for details. When connected to a DAW or other application that provides
a master MIDI clock, the tempo is set from within that application.
To engage Note Repeat, press the Note Repeat button while the desired bank is
active. All the pads will flash.
Press the pad assigned to the sound on which you'd like to enable Note Repeat.
Pads 1-8 will illuminate solid.
Press and hold the Note Value you would like to use. The Note Values displayed to the
right of each pad's number.
The sound assigned to the selected pad will repeat at
the selected value until you release the pad.
ATOM™
Owner's Manual
6