5
MIDI Mapping
5.4
Advanced Setup Mode
Turn Pad Note On/Off
5.4.5
Adjusting Brightness
5.4.6
By default, the 16 pads on your ATOM send Note On/Off messages on every bank.
Using Advanced Setup mode, you can configure any of the pads on Bank 1 to only
send CC messages. To disable Note On/Off for any pad, press the Show/Hide button
while Advanced Setup Mode is active. Pads that are illuminated have Note On/Off
enabled. Pads that are not illuminated will send CC messages only.
Note: You must be on Bank 1 when you enter Advanced Setup mode for this option to be
available.
To reset to default, press the Up button.
To adjust the brightness of the LEDs on your ATOM, press the Bank button while
Advanced Setup mode is active. This will allows you to advance through the three
brightness options available.
ATOM™
Owner's Manual
39