Advertisement
Proaim Lanc Zoom Controller
AT TA C H T O T H E PA N H A N D L E
1.
Loosen the clamp knob till enough space
is available.
2.
Attach to the pan handle.
1) Centre of pipe is to be fit to clamp
"V" shape.
2) Firmly tighten the clamp by using
hands.
CAUTION: Do not use excessive force.
F I X T H E C A B L E T O Z O O M U N I T
1.
Cable socket is available both front and
side.
2.
Insert the cable either depending on
situation.
It is working as same both front or side
position.
AT TA C H T H E C A B L E T O C A M E R A
Make sure that switch is changed to corresponding mode.
1.
Make sure that position is available on camera.
2.
Make sure that camera is switched off.
3.
Insert the cable at designated position.
CAUTION: Do not insert at wrong position which will cause unexpected damage.
O P E R AT I O N
Record start/stop button
This changes the mode of "Record start"
and "Record stop" alternatively.
Zoom lever (Variable speed zoom)
"W" Indication: Turn toward "W" to zoom
out to wide-angle.
"T" Indication: Turn toward "T" to zoom
out to telephoto.
4
Advertisement
