Table of Contents
Advertisement
Youngkook
b. Wrong power supply or voltage is used.
c.Parts fall down or shell is damaged.
d.There is abnormality in product performance.
e.PTZ still does not work normally although being operated as per the User
Manual.
1.1.15When replacing spare parts, please use those that are recognized by our company or
that are the same with the original ones. Substitutes without recognition might
cause hazard.
1.1.16It's suggested to use threaded fastening adhesive to fasten in installing the product.
1.2 Precautions
1.2.1 Heavy load, strenuous vibration and soaking are forbidden in transit, safekeeping and
installation. Otherwise the equipment might be damaged.
1.2.2 The product shall be kept away from vibrating or strong magnetic field.
1.2.3 If you want to change the place where the product has been installed, make sure
power has been shut off and then move.
1.2.4 Contact supplier if the product does not work normally. Do not separate or modify the
product in any form. Manufacturer bears no responsibility for any problem that has
been caused by unapproved separation or repair.
1.2.5 Do not scrub the surface of the product with chemical detergent or other corrosive
liquid. Otherwise, the product surface might be deformed or its protective layer
might be damaged.
1.2.6 Effective grounding to PTZ shell shall be conducted to guarantee the safety of the
equipment inside PTZ.
1.2.7 Do not focus the camera installed inside PTZ at object with strong light for long time.
Otherwise, the camera's CCD might become ineffective easily, causing the fault
like no image or fuzzy image.
2Product Introduction
2.1 Applications of the Product
User Manual for Explosion-proof PTZ Camera
Advertisement
Table of Contents
