Table of Contents
Advertisement
Youngkook
explosion-proof cabinet must exceed five threads, and the screw thread of PTZ's
outlet hole is G3/4'' thread.
4. Control and operating instructions
4.1 DIP switch settings
Use the cross screwdriver to remove the screw of the fixed DIP switchcover, remove the
DIP switch cover, you can see the DIP switch as shownbelow ( Add 1 Protocol PelcoD
Baud rate 9600)
SW1 is the address DIP switch, SW2 is the baud rate protocol DIP switch.
•The address can be set from 1 to 255. The address dialing method isshown in the table
below（SW1）
•Optional Pelco D and Pelco P （SW2）
User Manual for Explosion-proof PTZ Camera
Advertisement
Table of Contents
