Table of Contents
Advertisement
Youngkook
Self-test normal, cannot
control
Repeated restart
Can not control the
lens to perform zoom
zoom action
Can not recall the set
lens preset point
The image is lost
when the control
device rotates
Note: If the customer to buy this product does not use the lens presetfunction, as far as
possible the DIP switch relative to the set lens presetdialing is not allocated to OFF.
User Manual for Explosion-proof PTZ Camera
industrialGigabit switches
Access
ofhigh-performance decoder
Wrong wiring / rewiring
Set the baud rate, protocol, address and devicemismatch /
screen configuration according to deviceparameters
Insufficient supply voltage or voltage instability / toensure that
the input device voltage stability
Wiring error / re-connect the lens control lineCircuit board lens
control problems / replacementcircuit board (please contact
after-sales reworkprocessing, do not replace parts or repair)
DIP switch relative to the set lens preset dialing is notset to
ON / DIP switch control lens preset dialing dialinto ON
Rotation process at the same location lost image /conductive
slip ring there is a bad contact, replacethe parts (please contact
after-sales rework, do notreplace parts or repair)
decoder
performance
/
replacement
Advertisement
Table of Contents
