Zhiyun SMOOTH 4 User Manual page 10

The Use of Stabilizer
⓬ Video Button [
Single press to start or stop recording.
⓭ Mode Switch Button
Push slider up to enter PF(Pan Following) Mode;
●
Push slider down to enter L(Locking) Mode.
●
⓮ Power Button [
Press the button for 2 seconds to turn on/off the
stabilizer;
⓯ Battery Level Indicator
The button shows how much power is left.
●
0~25%: one blue light;
●
25~50%: two blue lights;
●
50~75%: three blue lights;
●
75~100%: four blue lights.
●
⓰ "PhoneGo" Mode Button - Full-speed Following
Mode Button
When pressing this button, the stabilizer enters Full-
speed Following Mode - "PhoneGo". Smooth 4 can
then follow your move synchronously at full speed.
⓱ Following Mode Button
When pressing the button, the stabilizer enters
●
following mode;
When double pressing the button, the tilt axis
●
motor and roll axis motor go back to initial state.
1. In standby mode, the stabilizer can still adjust
phone camera parameters;
2. Part of the function buttons mentioned
above can only be used when the stabilizer is
connected to "ZY Play" App in the phone.
]
]
8