Marklin Digital 60657 Instruction page 42

The following selection is only for locomotives with DCC decoders.
DCC
Please check the instructions for your locomotive to see if these settings can be done.
Select:
Speed Levels
Programming a Locomotive
DCC
Select: Program
Locomotive
First, set the CV value to be edited (according to your decoder / locomotive instructions)
and confirm the selection. First, the CV value being sought is read in; after that you can
change the value in Step 2 and confirm. With this procedure you can change any permissi-
ble CV value.
18
Select
Select
Scroll to
select
Scroll to
select
Select
Confirm
selection