Advertisement
Initial Camera Settings
-
Fully charge camera battery.
-
Insert and format a compatible memory card.
-
Set Date and Time.
-
Set AF Illuminator to "Off."
-
Set Red Eye Reduction to "Off."
-
Set Shooting Mode to "P" Program Auto. Use "M" Manual Mode to
manually adjust the shutter speed and aperture settings.
-
Set White Balance to Auto "WB AUTO."
-
Set Metering Mode to "Center AF."
-
Set Focus to "Center."
-
Set ISO to 125.
-
Set Flash to "On
-
Set Image Size to "16M."
Notes: If overexposure occurs, adjust the "EV" setting, use the "M" manual
mode and adjust aperture accordingly, or back away from the subject
and zoom in.
-
A strobe focusing light is recommended to assist autofocus underwater.
-
Control Wheel 6 - page 2 has three functions. The rubber dot will
activate the flash mode for changing to the preferred setting. The rubber
pad will rotate the dial to change shutter speed, aperture, and ISO
settings in the "M" manual mode. When the flat area of the dial is facing
the camera control wheel, no camera functions can be activated or
changed.
WD-4 Wide-Angle Conversion Dome 6430.4
The removeable WD-4 corrects light refraction underwater,
restoring the camera's original angle of coverage. Approximately
3/4 of the camera's zoom range can be used with the dome in
place. Slight vignetting may occur at camera's widest angle setting.
External Macro Adaptor 9306.82
Allows attachment of 67mm threaded macro lenses from Inon and
Epoque. NOT for use with 67mm threaded wide-angle lenses.
Always use flash."
3
Advertisement
