Technical Specification; Technical Sheet; Frequency Response And Impedance Curve - Beta Three TW Series User Manual

Two way15 inch full range passive speaker. pro loudspeaker system
Hide thumbs Also See for TW Series:
Table of Contents

Advertisement

TECHNICAL SPECIFICATION

Technical Sheet

System:
Tweeter:
Woofer:
Frequency response(-3dB):
Frequency response(-10dB):
Sensitivity(1W@1m):
Max. SPL(1m):
Power:
Dispersion(H×V):
Rated impedance:
Cabinet:
Mounting accessories:
Painting:
Connector:
Cabinet dimension:
(W
D
Package dimension:
(W
D
Net weight(pc):
Gross weight(pc):

Frequency Response And Impedance Curve

120
110
100
90
80
70
20
50
Passive full range wooden
speaker with painting
1×44mm compression driver
1×15" Woofer
1
45Hz-17kHz
40Hz-18kHz
2
96dB
3
119dB/125dB(PEAK)
4
300W
(RMS)
600W (MUSIC)
1200W (PEAK)
50
55
8 Ohms
Trapezoidal box, Plywood
Three-point lifting
Cabinet coated by Polyurethane paint;
grille is powder coated
NL4
2
450
450
700mm
H)
(17.7
17.7
27.6in)
560
560
820mm
(22.1
22.1
32.3in)
H)
27.6kg(60.7 lb)
31.0kg(68.2 lb)
Frequency response curve
Impedance curve
100
Speaker Testing Method
1. Frequency Response
Use Pink noise to test the speaker in the anechoic chamber,
adjust the level to make the speaker work at its rated impedance
and set the output
1m away from the speaker.
2. Sensitivity
Use full range Pink noise which has been modified using
an EQ
increasing the
impedance and set the
sensitivity 1m away from the speaker.
3. MAX.SPL
Use full range Pink noise which has been modified using
an EQ
curve to test the
i n c r e a s e t h e
maximum power output level, then test the SPL1m away
from the speaker.
4. Rated Power
Use Pink noise to the IEC#268-5 standard to test the speaker,
increase the signal for a continuous period of100 hours,
the rated power is the power when the speaker will show
no visible or measurable damage.
1000
Frequency (Hz)
TW Series Pro Loudspeaker System
power
at 1W, then test the frequency response
curve to test the
speaker in the anechoic chamber,
signal to make the speaker
power output at 1W, then test
speaker in the anechoic chamber ,
s i g n a l t o m a k e t h e s p e a k e r
10000
TW15
work at its rated
the
w o r k a t i t s
70
45
27
18
12
7
20000
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tw15

Table of Contents