Operation - Rave Sports Inflatable Dock Slide Owner's Manual

Step 4 – Buckle straps to Dock Slide
Position the slide between the two straps. Attach the free
end of both straps to the buckle on each side of the slide.
Feed the strap through the backside (slide side) of the buckle
jaw and pull snug. Pull both straps tight so the slide is
securely fastened to the surface of the dock. Tie off the
remaining loose end of both straps in a secure fashion.
option for extra security, but is not absolutely necessary.
Before sliding, check to make sure the slide is securely fastened
to the dock and the decking will not lift during use. Secure
decking if necessary.

Operation

Before sliding, wet slide surface with water. Sliding on a dry
surface can cause burns to the skin or lack of sliding
movement.
Place a piece of foam or other non-slip
mat (not included) on the surface of the
deck where the slide will be positioned.
This will help protect the inflatable slide
from wear and possible puncture.
NOTE: Two extra D-rings are
attached to the Dock Slide on the
upper left and right sides of the
steps side. If your Dock Slide is not
secure with the 2 lower straps
included, you may add extra
security by tying ropes or other
straps here. This is an additional
10