Advertisement
6 | OPERATION INSTRUCTIONS
■
Air filter cleanning reminding function
The wired remote controller records the total running time of the
indoor unit, when the accumulated running time reaches the pre-set
value, the air filter cleaning reminding icon
remind that the air filter of the indoor unit need to be cleaned.
Long press
for 2 seconds, and reset the reminding icon and
the wired remote controller will re-accumulate the total running time
of the indoor unit.
CAUTION
The default setting value of the reminding function is 2500 hours,
and it can change to be 1250 hours, 5000 hours or 10000 hours.
The setting methods please refer to the installation manual.
■
Swing Function
Press the swing button
to activate the swing function when the
fan of indoor unit is turned on, and the swing icon
Press this button again can deactivate the swing function, and the
swing icon
lights off. This function is effective when it is used with
the relative indoor unit.
■
Query function:
Hold the FAN SPEED button and Quiet /OK button to display the
temperature from temperature sensor. Use
to switch display of room temperature(tf) , middle evaporator
temperature t2 and evaporator-outlet temperature t2b. Press
button or wait 5s will exit the query function and back to normal
display.
6720863625 (2016/04)
will be lighted up, to
will be lighted up.
and
button
CLIMATE 5000 VRF
Advertisement
