Cleaning And Care; Storage - Silvercrest ELECTRIC KETTLE SWKK 3000 A1 Operating Instructions Manual

Cleaning and Care

Danger
Do not open any part of the housing. There are no
operating elements inside. An open housing can create
the risk of a life-threatening electrical shock.
Never submerse any parts of the appliance in
water or other liquids! This can create the risk
of a life-threatening electrical shock if residual
liquid comes into contact with powered
components.
Before cleaning the appliance,...
• first, remove the plug from the power socket and
allow the appliance to cool down completely.
• Clean the exterior surfaces and the power cable
with a slighly damp cloth. Be sure to dry the
appliance well before taking it back into use.
• Never use any cleansers, abbrasive substances
or solvents. These can damage the appliance.
In the event of scale deposits
• Before descaling, remove the spout sieve 7 (see
chapter "Removing/replacing the pourer sieve").
• Take any decalcifying agent used for kitchen
utensils (e.g. decalcifiers for coffee machines)
from a grocery shop. Proceed as detailed in the
instructions provided for the use of the decalcfying
agent.
Removing/replacing the pouring sieve
• Open the lid 1
• Press the plastic tab down and simultaneously
pull the spout sieve 7 inwards.
• Remove the spout sieve 7
• Clean the spout sieve 7 with a moistened wash-
cloth under running water.
• After cleaning, place the spout sieve 7 against
the opening on the inside . Ensure that the lower
recess is sitting on the pin inside the kettle. Press
on the spout sieve 7 until it engages.
• Should the scale deposits on the spout sieve 7
be firmly established, place it in a water-vinegar
solution with a ratio of 6:1 for several hours. The
scale deposits will dissolve. Rinse the spout sieve
7 with lots of clean water.

Storage

Allow the appliance to cool off completely before
putting it into storage.
• Wind the power cable around the cable winder 5
under the base 4.
• Store the appliance in a dry place.
- 4 -