No Sound From The Microphone; Bluetooth® Device Pairing Problems; Other Bluetooth® Problems - RockJam RockCube RC-1 User Manual

No sound from the microphone

• Make sure the microphone is firmly connected to the MIC socket.
• Make sure the ON/OFF switch on the microphone is set to the ON position.
• Make sure the MIC Volume control setting is not set too low.
• The Master Volume Knob could be set to minimum; raise the volume.
Bluetooth® device pairing problems
(Mobile phone or Tablet etc.) cannot be paired or connected with the RockCube
• You may not have not activated the Bluetooth function of your mobile device; refer to
the Bluetooth® device user guide.
• The RockCube is not in pairing mode; switch the RockCube off and then on to restart pairing.
• Another Bluetooth® device may be connected; disconnect that device before trying to connect
a new Bluetooth® device.
Other Bluetooth® problems
The music does not play on the RockCube after successfully connecting with Bluetooth®
• Ensure your Bluetooth® device can support the A2DP Bluetooth® profile.
• The volume on the external Bluetooth® device is set to low or muted; raise the volume of the
Bluetooth® device as required.
• The Bluetooth® audio breaks up. Move the Bluetooth® device closer to the RockCube or
switch off the 'Wi-Fi' on the Bluetooth® device as that can sometimes improve the audio
playback quality.
14