Advertisement
The original dust
11
cover (1585BP--
MCAP) can be used
to insure proper
seating of plug.
ATTENTION: To assist safe installation, comply
with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals
unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
PN- -26346
Printed in USA
While maintaining
12
pressure on plug or
keeping dust cap engaged,
tighten the flex nut to
0.5 N•m (5 in•lbs).
Place optional dust
13
cap (1585BP--MCAP)
chain over plug housing and
position between flex nut
and plug assembly as
shown. Tighten chain to
secure.
IP67 rating can only be achieved when using
an IP67 rated enclosure with a properly assembled
industrial outlet or industrial plug cap.
2
Advertisement
