Bushranger BRU36v9201 Operator's Manual page 20

MAINTENANCE AND CARE
To avoid premature wear of the bar make sure it is turned over periodically. If it should be necessary to turn the bar
over or replace it, follow the instructions below:
• Remove the casing, the chain and the bar, carefully following the instructions provided.
Remove the screw using a cross-head screwdriver and remove the tension adjuster.
To avoid asymmetrical wear on the bar, make sure it is turned over periodically.
IMPORTANT
When initially assembled, a "threadlocker" was inserted on the screw thread to prevent it from accidentally working
loose, this means that a certain amount of force will be needed to remove the screw; use a clamp to block.
WARNING
The characteristic data of the chain and bar homologated for this machine are showing in the "EC Conformity
Statement" that accompanies same machine. Do not use other types of chains or bars for safety reasons. The table
gives the sharpening data for different types of chains, but this does not mean you can use different chains from the
homologated one.
20