Table of Contents
Advertisement
Troubleshooting
Refer to the following table if you are experiencing trouble with your camera.
Contact an authorized technician if the table does not provide you with a
solution to the trouble.
Problem
• Check the power cable and the wiring between the
No display
camera and the monitor.
• Ensure proper video cable connection (Video Out
Jack).
• The lens could be dirty. Clean with a soft, clean
Dim display
piece of cloth.
• Adjust monitor settings.
• Adjust camera position if exposed to a strong light
source.
• Adjust the monitor's contrast level.
Dark display
• Set the intermediate device, if in use, to 75Ω/ Hi-z
(refer to p.15).
• Check the power source for compliance with
The camera is not
specifications.
functioning properly and
its surface is hot
Motion Detection
• Ensure that the feature is set to ON.
feature is not active.
• Check the SENSITIVITY level.
• Adjust and configure WHITE BAL.
Uneven colors
44
COLOR CCD CAMERA
Solution
User's Manual
Problem
Flickering
• The camera may be facing the sun or a fluorescent
light. Adjust the position of the camera.
• The camera may be connected to a DC power
Can't select LL mode
source. Connect to an AC power source.
LL is not function
• Check external SYNC signal frequency (should be
properly.
60Hz for NTSC, 50Hz for PAL).
45
COLOR CCD CAMERA
Solution
User's Manual
Advertisement
Table of Contents
