Table of Contents
Advertisement
Operating Your Camera
Press the SET button.
Increase or decrease detection sensitivity by setting the 'SENSITIVITY' value.
· When completed, press SET button.
Notes
Tips on Using the Motion Detection Feature
• Once the sensitivity level has been set, perform a test to verify proper operation
of the feature.
• The feature may not function properly under flickering light conditions.
• The camera interprets sudden changes in lighting and subsequent change in
brightness of an object as motion.
• With the feature enabled, other algorithms may require additional time to operate
than usual.
• This system does not guarantee prevention of fire or theft.
The manufacturer shall not be held responsible for any
accident or damage incurred.
• Connect an external alarm device to MD Out on back of
the camera.
26
COLOR CCD CAMERA
User's Manual
FOCUS
1. Press the SET button to access the main setup manu and then position the
indicator over FOCUS using the UP or DOWN button.
2. Press the SET button.
MODE: You can select the most suitable zoom mode. Move the arrow indicator to
'MODE' using UP or DOWN button.
•AUTO : Select AUTO and press the SET button to confirm. Increase or decrease
optical zoom (ZOOM) or digital zoom (D-
ZOOM) positions using the UP or DOWN
button while verifying the changes on screen.
Enabling D-ZOOM (ON) means that digital
zoom will activate once optical zoom ends.
Focus is automatically adjusted with moving
zoom.
COLOR CCD CAMERA
27
User's Manual
Advertisement
Table of Contents
