Samsung LW17N23W Service Manual page 12

3 Disassembly and Reassembly
3-2 Replacement Order of Lamp Assemblies
LCD panal may not be serviced. (Lamps are generally located at top and bottom of panel, which may be
replaced.However,for the Victoria LTA170WP_L01 panel, the lamp is firmly soldered inside of the back
panel. Therefore,servicing the lamp may cause a defective panel.Also,servicing lamp requires front glass
removal, which may cause scratch and/or foreign materials on the glass.)
3-3 Reassembly
Reassembly procedures are in the reverse order of dissasembly procedures.
3-2
6. Remove 4 screws from the main board and
disconnect cable. (see illustrations)
7. Lift up the panel.
LW17N23W