Figure 50. Installing the internal speaker
Figure 51. Pivoting the drive bay assembly downward
6. Connect the new internal speaker cable to the system board.
7. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 60.
Replacing the thermal sensor
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove external options. See "Replacing external options" on page 14.
2. Remove the computer cover. See "Removing the computer cover" on page 16.
3. Remove the front bezel. See "Replacing the front bezel" on page 17.
4. Disconnect the thermal sensor cable from the system board.
.
Chapter 4
Replacing hardware
35