Figure 66. Installing the rear Wi-Fi antenna
6. Connect the new Wi-Fi antenna cables to the Wi-Fi card.
7. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 60.
Replacing the M.2 solid-state drive
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove external options. See "Replacing external options" on page 14.
2. Remove the computer cover. See "Removing the computer cover" on page 16.
3. Remove the front bezel. See "Replacing the front bezel" on page 17.
4. Pivot the drive bay assembly upward. See "Pivoting the drive bay assembly upward and downward" on
page 20.
5. Depending on your computer model, refer to one of the following to replace the M.2 solid-state drive.
• Type 1
Figure 67. Pulling out the stopper
42
M725s User Guide and Hardware Maintenance Manual