Headphone Output - iCON Pro Audio Upod Pro User Manual

4. Input gain level controls 1/2

These potentiometers control the input level of the associated analog
microphone (& instrument) inputs.
5. Master level control

This potentiometer controls the master output level of the analog outputs.

Note: Master level control will only adjust the output level of both the Line output
1/2 and the 3.5mm stereo output.
6. Headphone level control

These potentiometers control the output level of the associated headphone
output.

7. Headphone output

These output jacks accept a standard 1/4" stereo TRS headphone connector.
8. RCA gain level control

This potentiometer controls the input level of the RCA inputs.
9. 72-DSP selector knob

Rotate to select the DSP effect from 1-72.
10. Hi, Mid & Low EQ adjust knobs

Adjust the Hi, Mid & Low EQ parameters for inputs 1 & 2.
11. Attenuator (Voice-Over) button

Activating the attenuator (Voice-Over) function will allow the music signal from
PC & RCA inputs to be ramped down when there is input signal from input 1 or 2.
Signal will gradually ramp up again if there is no input signal.
12. Voice-Over function control knobs
12.1 BGM ramping speed
12.2 BGM ducking amount
13. Input to PC
Mic with DSP button
Mixing button
Turn clockwise to increase the ramping speed
of the BGM
Turn clockwise to increase
the ducking amount of the BGM
Controlling the input signal to PC. Wet signal
(activated)-DSP processed. Dry signal (inactivated)
-no DSP effect.
Controlling the input signal to PC. Activated to allow
all signals including RCA, PC and input 1 & 2 to be
recorded by PC. Inactivating it will only record the
input signals 1 & 2.
7