iCON Pro Audio Upod Pro User Manual

2 mic/1-guitar in, 2 line out recording usb interface with dsp effect built-in

Hide thumbs

Table Of Contents

2 Mic/1-Guitar in, 2 Line out recording USB Interface with

DSP effect built-in.

Table of Contents

Summary of Contents for iCON Pro Audio Upod Pro

Page 1 2 Mic/1-Guitar in, 2 Line out recording USB Interface with DSP effect built-in.
Page 2: Important Safety Instructions
Important Safety Instructions 1. Read this manual thoroughly before using this unit. 2. Keep this manual for future reference. 3. Take notice of and comply with all warnings included in the user's manual or indicated on the appliance. 4. Follow all instructions included in this manual. 5.
Page 3: Table Of Contents
Contents Introductions .....................4 What’s in the package? ................4 Features ....................5 Front/Top Panel ..................6 Rear Panel....................9 DSP Effect List ..................10 Hardware Connections ................12 Minimum System Requirements.............13 Specifications ..................14 Service....................15...
Page 4: Introductions
In these pages, you'll find a detailed description of the features of the Upod Pro digital audio interface, as well as a guided tour through its front and rear panels, step-by-step instructions for their setup and use, and full specifications.
Page 5: Features
Features The ICON Upod Pro USB recording interface provides an audio input and output module with USB connectivity. Main features include: ● 16-Bit 48KHz 2 mic-In/1 guitar-In, 2-Out USB Recording Interface ● 2x2 analog I/O full duplex recording and playback ●...
Page 6: Front/Top Panel
Front/Top Panel 12.2 12.1 1. “Mic” inputs 1/2 These hybrid connectors will accept a standard 3-pin XLR plug or a 1/4” TS connector. For condenser microphone with +48V phantom power or dynamic microphone. Note: For dynamic microphone user, please make 3-pin XLR (Balanced) sure +48V phantom power switch is “OFF”...
Page 7: Headphone Output
4. Input gain level controls 1/2 These potentiometers control the input level of the associated analog microphone (& instrument) inputs. 5. Master level control This potentiometer controls the master output level of the analog outputs. Note: Master level control will only adjust the output level of both the Line output 1/2 and the 3.5mm stereo output.
Page 8 14. Output select Controlling the output signal. DSP effected signal Direct out + DSP button will be monitored if activated. Direct signal (i.e. without DSP effect) will be Direct out button output and monitored. Tip: When “Direct Out + DSP” function activated, it is highly recommended to activate the “Direct Out”...
Page 9: Rear Panel
Upod Pro is not able to work without the provided power adaptor connected. The USB bus power is not able to provide sufficient power supply for Upod Pro. Note: External power adapter is needed if the Upod Pro is using as a standalone unit.
Page 10: Dsp Effect List
DSP Effect List Echo Theatre Hall Plate Reverb Room Vocal Echo A Small Theatre Small Hall Thin Plate Reverb Small Room Chorus Echo Medium Theatre Large Hall Large Plate Gated Reverb Large Room Gated Echo Large Theatre Hall Abbey Bright Plate Chorus Verb Bright Room Flang Echo...
Page 11 Different type of microphone connection method diagram Dynamic Dynamic Microphone Microphone (D2) (D2) 1/4” TR Unbalanced Condenser Condenser Microphone Microphone (M1) Balanced (M1) Note: For dynamic microphone user, please make sure +48V phantom power switch is “OFF” before you plug in your microphone, otherwise it may cause damage to your microphone.
Page 12: Hardware Connections
Hardware Connections Connect the Upod Pro digital audio interface outputs to your amplifier, powered monitors or surround system. Two-channel stereo operation, the default outputs are channels 1 and 2. If you are monitoring through headphones, connect your headphones to the device’s headphone output.
Page 13: Minimum System Requirements
Visit the Windows update web pages to make sure you have the most current updates and fixes supplied by Microsoft. On the Mac, the Upod Pro digital audio interface is supported by Mac OSX version 10.5.5 or later (must be Intel-Mac).
Page 14: Specifications
Specifications Mic Input: Frequency Response ........22Hz to 20kHz (+/-0.2dB) Dynamic Range ..........90dB, A-weighted Signal-to-Noise Ratio........-90dB, A-weighted THD+N ............<0.0061% (-86dB) Crosstalk............-85dB @ 1kHz Input Impedance: Mic in ......... 1.8K Ohms, typical Adjustable Gain ..........+39dB Inst Input: Frequency Response ........
Page 15: Service
Services If your Upod Pro needs servicing, follow these instructions. Check our online help centre at , for http://support.iconproaudio.com/hc/en-us information, knowledge, and downloads such as 1. FAQ 2. Download 3. Learn More 4. Forum Very often you will find solutions on these pages. If you don’t find a solution, create a support ticket at our online ACS (Auto Customer Support) at the below link, and our technical support team will assist you as soon as we can.
Page 16 www.iconproaudio.com www.support.iconproaudio.com www.instagram.com/iconproaudio www.facebook.com/iconproaudio www.youtube.com/iconproaudi o...