Front/Top Panel; V Phantom Power Switch - iCON Pro Audio Upod Pro User Manual

Front/Top Panel

10
8
1. "Mic" inputs 1/2

These hybrid connectors will accept a standard 3-pin XLR plug or a 1/4" TS
connector.
3-pin XLR (Balanced)
1/4" TS (Unbalanced)

Please refer to P.11 for the connection method of different type of microphone.
2. HI-Z input & gain control

This is high impedance input for guitar/bass with individual gain control knob.

3. 48V phantom power switch

Press to supply +48V phantom power to both XLR input. This phantom power
circuit is suitable for most condenser microphones.
6
9
13
14
3
11
2
4
For condenser microphone with +48V phantom
power or dynamic microphone.
Note:
sure +48V phantom power switch is "OFF" before
you plug in your microphone, otherwise it may cause
damage to your microphone.
For condenser microphone with +5V phantom power
or dynamic microphone.
Note:
must be used in order to have the +5V phantom
power.
For dynamic microphone user, TS cable must be
used, otherwise the +5V phantom power may cause
damage to your microphone.
5
12.2
12.1
6
For dynamic microphone user, please make
For condenser microphone user, TRS cable
2 1 7