Usals Setting - Topfield TF5000CI User Manual

34
Motor Control
Goto:
Store:
The followings are available only at the Installer mode.
Recalculate:
Goto Ref:
Limit E, Limit W:
Limit Off:
Reset:
Service Search
After saving the DiSEqC configuration at the highest signal
quality, press
lected satellite.

4.5.4 USALS Setting

USALS is very convenient motorized DiSEqC system that sup-
ports DiSEqC 1.3 command and also can get the satellite po-
sition automatically if you know your geographical location.
Basically, the listed satellites have its Longitude and therefore
the angle of the satellite can be calculated without problem.
If you have USALS motorized system, then you can use the
USALS as followings.
All manuals and user guides at all-guides.com
Move the motor to the stored position of the selected
satellite.
Store the current position of the motor for the selected
satellite.
Recalculate the position of the Stab Rotor motor.
Go to reference.
Set the limits of East and West position.
Remove the limitation.
Reset all the stored position of the motor relative to the
'0' position
£
¢ ¡
button to start service searching of the se-
OK
Operation