16
Now this chapter assumes that the STB system has been in-
stalled correctly, meaning:
If the STB has not been installed or connected properly, please
refer Chapter
are available from the Main menu. Press
it.
All manuals and user guides at all-guides.com
4.
Set the Motorized DiSEqC 1.2 and the USALS items ac-
cording to your antenna, LNB and satellite settings. If
the right Satellite Name and LNB Frequency were not
found in the list, call the dealer for satellite information.
£
¢
¡
5.
Then, press
OK
the Service Search menu.
6.
Set the Search Mode to the Auto. (Manual, Advanced or
SMATV Search)
7.
Select the Start Search. . . item and press
8.
The search procedure will take a while. Press
when the searching process is finished to confirm and
save the new service list.
9.
For further information, please refer to Section
page 27.
•
The satellite dish for the STB has been installed, con-
nected to the STB and correctly adjusted to the proper
satellite.
•
The STB is connected to the TV.
•
The RCU has batteries and ready to control the STB.
3
Installation. Many of the functions of the STB
button at Service Search item and go to
£
¢
MENU
Operation
£
¢
¡
button.
OK
£
¢
¡
button
OK
4.5.1
on
¡
button to open