Bulb Setting - Sigma Digital SLR Camera SD14 User Manual

BULB SETTING

When long time exposures are required (for shooting night scenes or very dark
subjects) the use of the "Bulb" setting is recommended. Please use a tripod,
when taking pictures with this setting. Bulb photography can be performed only
when ISO sensitivity is set to ISO100 and 200. (Please refer to P.57 about setting
ISO sensitivity.)
CAUTION !!
•
It is not possible to use Bulb photography for more than 30 seconds. The
shutter will automatically close about 30 seconds after the shutter button was
pressed.
1
Set the "D"-Dial on the "Drive Area" (P.14).
2
Set the "Mode"-Dial to the "M" position.
3
Rotate the "C" -dial until
the top LCD panel's shutter speed location.
4
While pressing
-dial to select the desired aperture.
5
Depress the shutter button fully to take the
picture.
is displayed on
button, rotate the "C"
42