Metronome Pattern - Yamaha Harmony Director HD-200 Owner's Manual

Metronome Pattern

You can select how the metronome plays back.
Press the Note Select [B] button to move the cursor to the "Pattern" column, then select the desired setting from
the following by using the DATA ENTRY dial or [+]/[-] buttons.
Setting
All
Alternate
Volume Balance
You can adjust the volume balance between five keyboard areas as shown below.
Press either the C
ENTRY dial or [+]/[-] buttons. Set the volume for other keyboard areas as necessary.
Select Button
Area
Display
Range
17
Display
All The metronome plays back all the beats for all resolution types (ACCENT,
quarter note, 8th note, triplet and 16th note) completely.
Alternate The metronome plays back all the beats for all resolution types so that multiple
click sounds are not doubled at the same timing. At the first beat, for example,
only the ACCENT sound will be played back. At the 2nd - 4th beats with the
meter 4/4, for example, only the quarter note will be played back.
, E b , F or B b button to specify the keyboard area, then set the volume by using the DATA
# # #
, G
#
C
Low (around A-1) Mid-Low (around G1)
Low
- -
10 – +5
b
#
E F
Mid (around F3)
M-L Mid
-
10 – +5 10 – +5
Movement
#
G
Mid-High (around D5)
M-H
-
10 – +5
b
B
High (around C7)
High
-
10 – +5