Order Information; Complete Systems; Replacement / Individual Parts; Accessories - Cedes cegard/Lift LI Installation And Operation Manual

cegard/Lift LI
12.

Order information

12.1.

Complete systems

CEDES
Description
Part number
100 891 cegard/Lift LI, complete for an elevator cabin
entry 0.7 ... 4.0 m. Opto edges with 16
elements, monitoring height 1,630 mm
Connection cable lengths:
Receiver edge 6 m, emitter edge 6 m
100 892 cegard/Lift LI complete for an elevator cabin
entry 4.0 ... 8.0 m. Opto edges with 16
elements, monitoring height 1,630 mm
Connection cable lengths:
Receiver edge 10 m, emitter edge 6 m
12.2.

Replacement / Individual parts

CEDES
Description
Part number
100 938 Control unit light curtain
102 005 Control unit light curtain for opto edges with 24
elements
101 249 Emitter edge, 16 elements, monitoring height
1,630 mm
101 248 Receiver edge 0.7 ... 4.0 m. 16 elements,
monitoring height 1,630 mm
101 281 Receiver edge 4.0 ... 8.0 m. 16 elements,
monitoring height 1,630 mm
101 072 Opto edge pair, operating range 0.7 ... 4.0 m.
16 elements, monitoring height 1,630 mm
101 073 Opto edge pair, operating range 4.0 ... 8.0 m.
16 elements, monitoring height 1,630 mm
102 809 Opto edge pair, operating range 0.7 ... 4.0 m.
24 elements, monitoring height 1,908 mm
102 812 Opto edge pair, operating range 0.7 ... 4.0 m.
24 elements, monitoring height 2,012 mm
101 090 Operation manual 4 languages (D / F / E / I)
101 250 IR window for recessed mounting kit
14
Installation and Operation Manual
12.3.

Accessories

CEDES
Part number
100 847
100 848
101 291
100 098
100 849
104 075
104 073
101 243
Other systems and accessories upon request from
your CEDES partner or CEDES representative.
12.4.

Customer specific opto edge pairs

CEDES
Part number
101 471
101 472
If requested, the opto edges can also be supplied in
IP67 conform housing.
www.cedes.com
Description
Mounting kit for recessed mounting, incl.
drilling template, drill, (stainless steel,
painted yellow and black)
Mounting kit and guard plate for surface
mounting of one entrance incl. drilling
template, drill, (stainless steel, painted
yellow and black)
Drilling template, if mounting kit 100 847 not
desired
Switching relay for controlling automatic
doors or for the load control indicator for
elevators with door openings at each end of
the cabin. Minimum supply voltage of the
system 22 VDC.
Alarm device for surface mounting incl. 4 m
connection cable for
intermittent tone
Slot type sensor GLS 126 for override delay,
5 m cable, NC
Slot type sensor GLS 126 for override delay,
5 m cable, NO
Information sign in 4 languages (Reset
button)
Description
Opto edge pair 16 elements
Length of opto edges and monitoring height
as desired
Opto edge pair 24 elements
Length of opto edges and monitoring height
as desired
© CEDES/July 2017
continuous or